Masonry Contractors in Queens, NY
Liberty General Contracting repairs and builds brick, block, stone and concrete for Queens homes and buildings. Get a free estimate for your masonry project.
Trusted by Queens homeowners for 12+ years, with a 4.7 star rating.
The service directory
Queens Masonry Services, From the Ground Up.
Brick, block, stone and concrete work for homes and buildings. The condition of your property and local rules shape the right plan.
Brick Repair and Repointing
Cracked bricks and worn mortar let water in. We repair them before damage spreads.
- Repointing and tuckpointing
- Loose, cracked or flaking brick replacement
- Mortar and brick color matching
Stoops, Steps and Porches
Queens stoops take daily wear and winter salt. We rebuild them safe and solid.
- Block, brick and stone walls
- Garden walls, piers and columns
- Wall caps and drainage stone
Chimney and Parapet Repair
Roofline masonry takes the worst weather. We fix loose bricks and failed mortar.
- Chimney repointing and rebuilds
- Parapet wall and coping repair
- Flashing and crown repair
Foundation Parging and Sealing
Damp basement walls often start outside. We repair parging and seal the surface.
- Foundation parging repair
- Crack sealing and surface coatings
- Drainage checks around the house
Sidewalk Repair and Violations
A DOT notice needs action. We repair the sidewalk to meet city rules.
- Sidewalk and curb repair
- Violation dismissal steps
- Permit and inspection steps
Pavers and Stone Veneer
Add curb appeal with pavers and stone. We build them on a solid base.
- Paver patios and walkways
- Stone veneer for entries and columns
- Borders, steps and edging

Why choose us
A Queens Masonry Team That Knows Queens Buildings.
Good masonry lasts for decades. Bad masonry fails in a few winters. We build repairs to last.
Our office is in Jamaica, Queens. We work across the borough, from Astoria and Ridgewood to Bayside and Howard Beach. We know the brick, the blocks and the weather.
Most brick damage starts with water. It may come from a bad roof edge, a clogged drain or open joints. We find the source and fix it, so the repair holds.
Attached row houses, two-family homes and older co-ops each need a different approach. We choose brick and mortar that suit your wall, so the repair looks right and does not harm the old brick.
You get a written estimate that lists the work, the materials and the steps. We check permits, protect your property and clean up every day.
Know what to look for
Small Cracks Can Point to Bigger Issues.
Cracks and Crumbling Mortar
Cracks in brick or joints, or mortar that feels sandy, let water in.
White Powder or Flaking Brick
White powder and flaking faces point to water moving through the wall.
Wobbly Steps or Lifted Slabs
Loose steps, moving railings and cracked sidewalk slabs are safety risks.
Water Stains or Damp Walls
Stains or damp walls inside often start with a problem outside.
Leaning walls, loose bricks overhead or unstable steps need quick attention. Keep people away from the area. Do not wait for a planned repair. Call for a free inspection.
Repair or rebuild
A Simple Guide to What Your Wall Needs.
What you see
What it usually needs
Why
Worn mortar, solid bricks
Repointing
Fresh mortar seals the joints
A few cracked bricks
Brick replacement
Only the bad bricks are swapped
Bulging or leaning wall
Partial or full rebuild
The wall may be unsafe
Cracked concrete steps
Repair or replace
It depends on the base
Wide cracks that keep growing
Engineer review first
It may be a structure problem
Masonry and Queens weather
Every Season Needs a Different Plan.
Queens rain, summer heat and winter cold affect brick and concrete. Plan repairs around both your building and the season.
Spring
Best time to inspect. Walk your property and look for new cracks, loose bricks and damp spots.
Summer
Mild, dry days help mortar and concrete set well. Protect fresh work from sudden heat.
Fall
Finish repairs before cold weather. Mortar needs time to cure before the first freeze.
Winter
Water seeps into cracks, freezes and pushes brick apart. Use a masonry safe ice melt on steps.
Masonry needs safe air and surface temperatures to cure. Not every outdoor job can go ahead in freezing weather. We tell you what is safe to do and when.
The borough, block by block
Local homes. Different renovation needs.
From our Jamaica office, we serve homes and buildings across Queens. In Astoria, Ridgewood and Woodside, we often see attached brick houses. In Bayside and Whitestone, many homes have brick fronts and stone details. In Forest Hills and Jackson Heights, co-ops and landmark rules are common.
- Astoria,ny
- Long Island City
- Woodside
- Sunnyside
- Forest Hills
- Jackson Heights
- Ridgewood
- Elmhurst
- Flushing
- Bayside
- Jamaica
- Fresh Meadows
From first look to final cleanup
A Clear Path to Your Masonry Project.
Share the Details
Send your Queens address, a few photos and what you see. Note any co-op or board rules.
Inspect and Plan
We visit, check the damage and find the cause. Then we set the scope, materials and price in writing.
Approve and Build
We confirm permits and approvals. Then we protect your property, remove bad work and rebuild.
Clean Up and Review
We clean up and walk the finished job with you. We explain how to care for the new work.
Masonry FAQs in Queens
How much do masonry contractors in Queens charge?
Price depends on damage, size, materials and access. We inspect first, then give a free written estimate. Photos help us give a quick first answer.
What is repointing?
Repointing replaces worn mortar between bricks. The bricks stay in place. Fresh mortar seals the joints and keeps water out.
Do I need a permit for masonry work in Queens?
Small repairs often do not. Sidewalk work, retaining walls, facades and structural changes may. We check your project before work starts.
Can a cracked stoop be repaired?
Often, yes. If the base is damaged or the steps are loose, a rebuild is safer. We check the base first.
How long does masonry repair take?
Small repairs take 1–3 days. Stoops take about a week. Larger walls can take 1–3 weeks. Weather and permits can change this.
Can you fix sidewalk violations in Queens?
Yes. We repair the sidewalk and help with the permit and inspection steps.
Can you match old brick and mortar?
We match brick size, color and texture as closely as we can. We also test mortar color. Landmark areas may require close matching.
Why do bricks crack or flake?
Water is the most common cause. Freezing, old mortar, settling and road salt also play a part.
Do you work on co-ops, condos and multi-family buildings?
Yes. We can prepare work plans and share insurance papers when a board asks for them.
Which Queens neighborhoods do you serve?
We serve Jamaica, Astoria, Flushing, Forest Hills, Jackson Heights, Ridgewood, Bayside and nearby areas. Call (347) 682-9840 for a free estimate.
Need a Masonry Contractor in Queens?
Tell us what needs repair. Send a few photos and your address. We will inspect the work and send a clear, free estimate with the scope, materials and timeline.
